Tools And Materials; Before You Begin - Kohler K-3588 Installation Manual

Hide thumbs Also See for K-3588:
Table of Contents

Advertisement

Available languages

Available languages

Tools and Materials

Phillips
Screwdriver
Socket
Wrench
Masking
Tape

Before You Begin

IMPORTANT! This product should be installed by an experienced
installer.
IMPORTANT! Two people are required to lift this toilet into place.
IMPORTANT! This product is designed to be installed directly to 4"
D. PVC waste tubing. It is not designed to use a floor flange. Special
installation measures may need to be taken if there is a floor flange
in place, including removing the floor flange or grinding it to allow
for proper fit.
This toilet does not install to a typical flange. It is designed to
install directly to PVC outlets only. No flange is needed.
Shut off the main water supply.
The supply location is not standard. Install the supply following
the rough-in diagram.
Observe all local plumbing and building codes.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
1095641-2-B
9/16" Drill
Bit
Sponge
Plus:
• Reciprocating Saw
Keyhole/
• Soapy Water
Compass Saw
• Support Blocks
2
Hex
Wrench
Kohler Co.

Advertisement

Table of Contents
loading

Table of Contents