Quick Start - NeuroTek Elite Series Quick Start Manual

To begin session, hold the power button for approximately 5
o
seconds to turn the device on.
Plug in your pulsers and or headset into the side of the Tac. If
o
you have an EyeScan or wireless devices see #4 of the manual
on how to pair the EyeScan or wireless headset to the Tac. For
wireless pulsers, see the manual for wireless pulsers. If you
don't you can continue to the next step.
On the main screen, you will see the words Resource (which
o
is slower speeds), and Reprocessing (which is higher speeds).
These are 2 preset profiles that you can use to get started.
You do have the ability to change the settings if needed.
Select which one you prefer. Once selected, the curser will
automatically go down to Start Session. Press Start Session, and
your session will begin. Your pulsers, headset, and EyeScan
will begin to work.
Once they are running, if you want to adjust the speed of
o
your devices, the volume of your headset, the settings on the
EyeScan, or the intensity of your pulsers, you will select one of
the icons in the middle of the screen. Once selected the icon
will turn green. So, the hand is for pulsers, the headset is for
your headset, the eye is for the EyeScan, and the last icon of
a clock is for speed. Once selected, the options to adjust the
speed, volume, mode, or intensity will appear. Press the arrows
to make the adjustments that you want up or down.
©NeuroTek 2021 ©NeuroTek 2020

Quick Start

Version 3.0 DTAC