NeuroTek Elite Series Quick Start Manual page 9

C. Do you have a wireless headset? If yes, continue below, if not
continue to step D.
Ensure your headset is charged using either the USB cord
o
that comes with the headset of the AC adapter that came
with the Tac
Press the play/pause button on headset until the blue/red
o
light flashes
On your Tac, select Settings
o
Select Wireless Headset – it will automatically scan for the
o
headset
When the scan is finished, you should see NeuroTek.
o
Select NeuroTek – you should see a check mark – If you
don't see NeuroTek - rescan
Then Select Connect – And you should see OK next to
o
NeuroTek
Back out to the main menu and you should see
o
Headphones in your list of connected devices.
Bluetooth
To turn off your headset, just press the pause play
o
button until you hear a sound, which will let you know it's
➊ On/Off, Volume Up, and Volume Down
powered off.
➋ Charging and Bluetooth
Bluetooth ON
®
light
©NeuroTek 2020
Headset Controls
®
Volume Up Volume Down
Power On/Off
Status
®
Bluetooth
➊ On/Off, Volume Up, and Volume Down
➋ Charging and Bluetooth
Bluetooth ON
®
light
Charging Port
©NeuroTek 2020
Headset Controls
®
Volume Up Volume Down
Power On/Off
Status
®
Version 3.0