Start A Session - NeuroTek Elite Series Quick Start Manual

A. Turn on Tac by holding the center power button for
5 seconds
B. Do you have an EyeScan? If yes, continue below. If no,
4

Start A Session

see step C.
Ensure your EyeScan is turned on. On your Tac,
o
A. Turn on Tac by holding the power button for 5 seconds
B. Do you have an EyeScan? If yes, continue below. If no, see Select Settings, then select Wireless Devices.
step C.
Your tac will automatically scan for wireless devices.
Ensure your EyeScan is turned on. On your Tac,
o
Once your device is found, it will show up on your
Select Settings, then select Wireless Devices. Your tac
Tac. Select the device by hitting enter and then a
will automatically scan for wireless devices. Once your
check mark will appear next to the device. Arrow
device is found, it will show up on your Tac. Select the
down and select connect. OK will appear next to
device by touching the device found on the screen
the device.
and then a check mark will appear next to the device.
Select Back until you get back to the Main Menu
o
Then select connect. OK will appear next to the
device.
Select Back until you get back to the Main Menu
o
©NeuroTek 2020

Version 3.0