Quick Start - NeuroTek Elite Series Quick Start Manual

4

Quick Start

o To begin a session, press the black dial until
To begin a session, press the black dial until
o
the lights turn on.
the lights turn on.
Plug in your pulsers and or headset into the side of the
o Plug in your pulsers and or headset into the side of the
o
Tac.
Tac.
To set the intensity of the pulsers, press the hand
o
o To set the intensity of the pulsers, press the hand
button and then turn the dial-up or down to the desired
button and then turn the dial-up or down to the desired
setting.
setting.
To set the speed, press the clock button
o
o To set the speed, press the clock button
and then turn the dial-up or down to the desired setting.
and then turn the dial-up or down to the desired setting.
To set the volume of your headset, select the sound button and turn
o To set the volume of your headset, select the sound button and
the dial right or left to the desired setting.
turn the dial-up or down to the desired setting.
Once the settings are selected, press the black dial to start your
Once the settings are selected, press the black dial to start your
session. To pause your session, press the black dial again.
session. To pause your session, press the black dial again.
If you need to change your settings during your session, press the
desired button for speed, volume, or intensity, and then turn the dial-
If you need to change your settings during your session, press the
up or down.
desired button for speed, volume, or intensity, and then turn the dial
up or down.
5- Low Battery Indicator
Low Battery Indicator
5
The l ow b att i ndication i s t hat a ll t hree o f t he b utton L EDs w ill b link
every 2 0 s econds f or 2 s econds. T he
The low battery indication is that all three of the button LEDs will blink
until t he b atteries a re d ead ( approx. 4 0 m ins.). I f y ou t urn o ff t he
every 20 seconds for 2 seconds. The Tac will continue to operate until
Tac i n l ow b attery m ode, t he d evice w ill n ot l et y ou s tart a s ession
the batteries are dead (approx. 40 mins.). If you turn off the Tac in
with a l ow b attery. T he s ystem w ill t urn o n, b link t he 3 L EDs f or 2
low battery mode, the device will not let you start a session with a
seconds t hen s hut o ff. E ither r eplace t he b atteries o r u se t he d evice
low battery. The system will turn on, blink the 3 LEDs for 2 seconds
plugged i nto p ower. T his f eature i s t o h elp p revent t he l oss o f p ower
then shut off. Either replace the batteries or use the device plugged
during a s ession.
into power. This feature is to help prevent the loss of power during a
session.
Note t hat i f t he b atteries a re i n t he l ow b att s tate a nd y ou p lug i n t he
adapter, t he l ow b attery i ndication i s m asked.
Note that if the batteries are in the low battery state and you plug in
the adapter, the low battery indication is masked.
©NeuroTek 2022
T ac w ill c ontinue t o o perate
Version 2.0
Version 1.0