Turning On Eprowallbox Move - Free2Move eSolutions eProWallbox Move User Manual

4. TURNING ON EPROWALLBOX MOVE
The device does not have start/stop buttons. Once installed, it is ready to be configured via App.
This allows the appropriate operating mode to be selected, depending on whether connection
to the charge point management platform is via app or in StandAlone mode, when the following
conditions are fulfilled:
correct installation, certified by qualified personnel

regular status of the device.

Once the device has been powered up, the LED will not blink immediately.
This can take up to one minute.
Danger of electric shock when the device is damaged. Use of a damaged device is
strictly forbidden.
If the device is damaged, follow the instructions below precisely to hazardous situations,
potentially resulting in damage to persons or things:
avoid using the damaged device

clearly label the damaged device so other people do not use it

call a qualified professional promptly so the device can be repaired or, if irreparably

damaged, taken out of service.
174