Installation manual - Annex A d v a n c e d f u n c t i o n a l i t i e s s e t u p TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............................3 ENERGY METER INSTALLATION....................
Please refer to local regulations and user and wallbox installer manuals on www.esolutions.free2move.com/document-library/ for more information about the installation process. Only Power Meters provided by Free2move eSolutions S.p.A. are compatible. Installation must be performed by qualified personnel in accordance with local regulations.
Installation manual - Annex A d v a n c e d f u n c t i o n a l i t i e s s e t u p ENERGY METER INSTALLATION During the installation always refer to the meter installation manual included in the package.
Page 5
Installation manual - Annex A d v a n c e d f u n c t i o n a l i t i e s s e t u p If included connect the Current Transformers as indicated in the meter installation manual, paying attention to drawn through the clamp the line according to the direction indicated on the sensor.
Installation manual - Annex A d v a n c e d f u n c t i o n a l i t i e s s e t u p 2.1.1 ENERGY METER CONFIGURATION Enter the menu by tapping&holding for 1.5 second the central display button for three-phase meter (or the lower part of the display for single-phase), until the page with the password is shown.
Installation manual - Annex A d v a n c e d f u n c t i o n a l i t i e s s e t u p PARAMETERS CONFIGURATION (INSTALLERS ONLY) The wallbox final configuration after installation should be done via the dedicated PowerUp app.
Page 8
Installation manual - Annex A d v a n c e d f u n c t i o n a l i t i e s s e t u p Power value electricity supply contract, also configurable customer.
Installation manual - Annex A d v a n c e d f u n c t i o n a l i t i e s s e t u p DPM USER CONFIGURATION Download eSolutions Charging, a dedicated App available for Android and iOS that...
Installation manual - Annex A d v a n c e d f u n c t i o n a l i t i e s s e t u p LOAD UNBALANCE To enable the load unbalance function and configure the maximum current phase unbalance according to local regulations.
Need help?
Do you have a question about the Annex and is the answer not in the manual?
Questions and answers