ORBIS MINI T - Time Switch Manual

Instructions on use

1. Manual switch
2. Index
3. Dial
4. Pins
5. Clock hands
6. Flush mounting accessory
7. Transparent cover
8. Removable terminal block
9. Connection base

Description

Analogue time switch with daily and weekly programming. Plug in screw terminal base, or "fast on" terminals. For the timed control of electrical equipment and systems.

Assembling

Automatic control, independent mounting of wall mounting or 35mm rail in accordance DIN EN 60715.

Connection

PROGRAMMING

Shift all the pins upwards and shift downwards the corresponding pins to the desired connection times, in which the 2-3 contact will stay closed.

SETTING

Turn the dial clockwise so that it meets with real time. The clock hands must meet with real time.

MANUAL SWITCH

3 positions:

- permanently on (2-3 closed)

- automatic operating

- permanently off (2-3 open)

Parameters

TECHNICAL CHARACTERISTICS

Supply: According with nameplate

Switching capacity: 16 (4) A / 250 V

Recommended maximum loads:

Own consumption: 1,8VA

Type of action: 1 BSTU in accordance EN 60730-2-7

Accuracy: ± 1 s/day at 23°C

Type of dial: Daily: 96 pins Weekly: 84 pins

Minimum switching time:
D/QRD: 15 minutes
QRS: 2 hours

Operating mode: step by step motor

Operating temperature:-10ºC to +45ºC

Contact: AgCdO One pole changeover

Battery reserve:
Type D: without reserve
Type QRD and QRS: 100 hours after uninterrupted supply of 48 hours.

Pollution situation: 2

This unit incorporates, in models with reserve, a battery which contents can be harmful to the environment. Please do not throw it away without removing the battery and putting it in the proper container for recycled or to send the complete unit back to the factory.

ORBIS TECNOLOGÍA ELÉCTRICA, S.A.
Lérida, 61 Telf.:+ 34 91 5672277;
E–28020 MADRID Fax: +34 91 5714006
E-mail: info@orbis.es
http://www.orbis.es