Orbis MINI T Operating Instructions

OPERATING INSTRUCTIONS
MANUAL
SWITCH
INDEX
DIAL

DESCRIPTION

Time switch with daily dial, captive pins and Faston type terminals for connection. It
controls time programming of electrical equipment and systems.

ASSEMBLING

Automatic control, independent mounting of wall mounting or 35mm rail in
accordance DIN EN 50022.

CONNECTION

According to the connection scheme.

PROGRAMMING

Shift all the pins upwards and shift downwards the corresponding pins to the desired
connection times, in which the 2-3 contact will stay closed.

SETTING

Turn the dial clockwise so that it meets with real time. The clock hands must meet
with real time.

MANUAL SWITCH

3 positions.
I .- permanently on (2-3 closed)
.- automatic operating
O .- permanently off (2-3 open)

TECHNICAL CHARACTERISTICS

Supply:
Switching capacity:
Own consumption:
Type of action:
Accuracy:
Type of dial:
Minimum switching time:
Operating mode:
Operating temperature:
Contact:
Battery reserve:
Pollution situation
This unit incorporates, in models with reserve, a battery which contents can be harmful
to the environment. Please do not throw it away without removing the battery and
putting it in the proper container for recycled or to send the complete unit back to the
factory.

DIMENSIONS:

72
I
72 0 66
ORBIS TECNOLOGÍA ELÉCTRICA, S.A.
Lérida, 61
Teléfono:+ 34 91 5672277;
MINI T
TIME SWITCH
PINS
I
0
CLOCK
HANDS
MINI T
M
5 4 3 2 1
L N
According with nameplate
16(4) A/250 V∼
1,8VA
D/S: 1 BRTU in accordance
EN 60730-2-7
QRD/QRS: 1 BSTU in accordance
EN 60730-2-7
Type D: Depending on line frequency
Type QRD: ≤ ± 1 s/day at 23°C
Daily: 96 pins
15 minutes
Type D: synchronous motor
Type QRD: step by step motor
Type D: 0ºC to +55ºC
Type QRD-QRS: -10ºC to +45ºC
AgCdO One pole changeover
Type D: without reserve
Type QRD: 100 hours after
uninterrumped supply of 48 hours.
Normal
38
21
54
A016.36.50755
E–28020 MADRID
Fax:+34 91 5714006
E-mail: info@orbis.es
http://www.orbis.es
54