Advertisement
RS485 Modbus
JXBS-3001-PH-RS Soil PH Sensor User Manual
III Configuration Software Installation
3.1 485 output mode sensor
Our company provides matching "sensor monitoring software", which can
easily read the parameters of the sensor using a computer, and flexibly modify
the device ID and address of the sensor.
3.1.1 Sensor connected to computer
After the sensor is correctly connected to the computer via USB to 485 and
provides power, you can see the correct COM port in the computer ("My
Computer-Properties-Device Manager-Port" to view the COM port).
As shown in the figure above, your serial number is COM10 at this time,
please remember this serial port, you need to fill in this serial number in the
sensor monitoring software.
If the COM port is not found in the device manager, it means that you have
not inserted the USB to 485 or installed the driver correctly, please contact the
technical staff for help.
3.1.2 Use of sensor monitoring software
The software interface is shown in the figure:
5 / 8
Advertisement
