Philips Azur 8000 Series Service Manual page 9

Disassembly Instruction
Before dismantling :
Ensure the plug is disconnected from the mains and Soleplate is not hot.
1
Remove BACKPLATE COVER 8
3
Lift up PUMP COVER PRINTED 5 & remove it
5
Open Filling Door & remove Rubber Bung
7
Loosen all wires, remove CLOSED END
CONNECTOR 16 & 17 (refer to page 15 for details)
Published by Philips Domestic Appliances
Document No. : CSW-07-081-21363
2
Remove 2x Screw A & remove BACKPLATE
MOLDED 9
4
Remove PUMP ASSY 15 and remove wire
Connections (applicable for Pump version only)
6
Remove Screw D
8
Remove BALL SWIVEL 13
Page 9 of 24 For internal use only