Advertisement
Dual GTN configuration
Enable the crossfilling of information between two GTN units.
Enabling this function on one GTN automatically enables it on the other.
Some types of data crossfill regardless of the current setting
When crossfilled from GTN to GNS, duplicate waypoint names, or names exceeding
leaving significant characters to aid in identification (e.g., USR003 becomes US+003).
Alerts:
Traffic pop-up acknowledgment
Missed approach waypoint popup acknowledgment
Altitude leg pop-up acknowledgment
External Sensors:
Synchro heading
Transponder status and commands
Flight Plan Catalog
System Setup:
User-defined NAV frequencies
Date/Time convention
Nearest airport criteria
Units (Nav angle, Fuel, and Temperature)
User-defined COM frequencies
CDI Scale setting
ILS CDI Capture setting
User waypoints
Includes active flight plan navigation data if you turn on the crossfill function.
Advertisement
