Advertisement
MIC selection can be set in the MIC window or on the Audio Panel page.
Tap MIC to toggle between MIC 1 and MIC 2. Under MIC Selection, select which
COM you want as your MIC selection. The selected MIC is automatically monitored
as indicated by the green numbers in the MON field.
Tap Passenger Address to toggle the passenger address system on and off.
Active:
Pilot uses one radio for MIC audio while the copilot uses a different radio
Pilot and copilot can transmit simultaneously over separate radios
Pilot can still listen to individually selected radios
Pilot and co-pilot may talk and listen independently to the radios or PA
Crew Intercom key is available allowing pilot and co-pilot to talk to each
other
Inactive:
Crew Intercom key is removed
Selections are limited to Monitored Radios and MIC Selection
When enabled, 3D audio allows you to focus on and understand one source at a
time. Depending on the selected COM channel, audio can be heard from your left,
in front of you, or from your right.
To hear 3D audio, set stereo/mono headphones to the stereo position.
Advertisement
