Advertisement
Availability dependent upon configuration
Offset range: +/-25% of total COM audio volume range
Numeric
Offset Value
Decrease
Offset
COM sidetone is audio spoken into the microphone that is played back in real
time over the headset. The offset setting determines sidetone volume for the
COM during radio transmission. Adjustments determine the amount that the
sidetone volume level is offset from the COM receiver volume or the configured
sidetone volume.
To adjust the offset from the COM receiver volume:
1. Enable Link to COM VOL.
2. Tap Offset and adjust as necessary.
To adjust the offset from the configured sidetone volume, disable Link to COM VOL
and then adjust the offset as necessary. These adjustments are fixed as they are
relative to the configured sidetone volume.
Increase
Offset
Enabling this function allows you to adjust the
amount that the sidetone volume level is offset from
the COM receiver volume. These adjustments are
dynamic in that they vary with the COM receiver
volume level.
If the unit is wired for audio
output, set the sidetone volume
offset to the preferred level.
By default, the offset value is set
to zero percent.
The unit retains manual offset
settings over power cycles.
Advertisement
