Advertisement
You may change the default function of the dual concentric knob to accommodate
your workflow. Knob control is set to Page Navigation by default.
Tap > System > Setup > COM/NAV > Knob Control Default.
Default knob function indicators change based on selection.
Page Navigation
Tapping the key again returns the default setting to Page Navigation.
Knob Control Radios option available for dual GTN Xi installations only
Remote radio frequency tuning is available for dual GTN Xi installations. The Knob
Control Radios option allows you to access remote unit radio functions via the dual
concentric control knob.
Local
Limits knob functionality to local
unit radios and page navigation
only.
For information about remote unit radio functions, read Remote Radio Control in
this section.
Tapping Knob Control Default changes the default
setting to COM Radio for standby frequency control.
Page navigation remains accessible via knob push.
Tapping Knob Control Radios toggles the knob
function between two control options.
Local & Remote
Sets knob control to both local
and remote navigators.
COM Radio
Advertisement
