Audio Inputs - Gentec PA70W User Manual

Speaker
(100V/10W)
Note: Speakers to be connected should be with constant pressure.

3.3.2 Audio Inputs

40 Watt Power Amplifier provides with 2 stereo audio inputs, one microphone input and
one digital fiber audio input. The following figure shows the audio input ports.
48V phantom power input
When the switch turns to "48V" (It has a good frequency characteristic, high input
impedance and high sensitivity in this mode), the MIC input will provide a 48V phantom
power. This is usually used for power supply for condenser microphone, Connection is:
"+" connects to positive, "-" connects to negative and "
Note: In this mode, only condenser microphone can be connected with.
MIC input
When the switch turns to "MIC" (It has a low frequency characteristics, and wide
frequency response in this mode), the microphone input is used for connecting with
dynamic microphone. There are two different connections:
a) Unbalanced connection:
"+" and " " connect to ground, and "-" connects to signal.
40W Power Amplifier
COM 70V 100V
Speaker
(100V/10W)
Figure 4 Audio Output Connection
Dial Switch, to select the MIC input mode,
includes MIC (dynamic microphone), 48V
(condenser microphone) and LINE
(normal audio or wireless microphone).
Figure 5 Audio Input Ports
6
Speaker Speaker
(100V/10W) (100V/10W)
" to ground.