4.3.3 Running Environment
While the control software is installed, we can activate the software through the RS232
port and set the parameters, to make it able to send RS232 commands to control 40
Watt Power Amplifier.
4.3.4 Function Settings
With the control software, we can easily switch the input channel, mute the output,
check the working status, and adjust the volume etc. Please refer the details in RS232
Communication Commands.
The interface of the control software is showed as below:
Parameter Configuration area
40W Power Amplifier
Monitoring area, indicates if
the command sent works.
Figure 12 Main Interface of Control Software
Command Sending area
11