IMPORTANT INFORMATION READ CAREFULLY. KEEP THIS INFORMATION FOR FURTHER REFERENCE. GENERAL GUIDELINES • • Please read the following instruction carefully and use the product accordingly. • Please keep this manual and hand it over when you transfer the product. This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed.
Page 4
If you have any further questions, please feel free to contact us wlive-cs@devaise.com by email or official website: We will reply ASAP. Before installation, please make sure you have all the hardware, the serial numbers are properly labeled corresponging to the list, and the quantity is correct.
EXPLODED DRAWING PARTS M6x40 M6x28 M6x20 M4x12 M4x14...
Page 6
M6x28 REMARK 1. Put a blanket under the board to avoid scratch or damage. 2. Please do not fully tighten screws until all screws are in place. ×4 ×2 ×2...
Page 7
M6x40 REMARK Please note the hole position of Part indicated in the picture should be faced inside. Please do not fully tighten screws until all screws are in place. ×12 M6x40 REMARK Please note the hole position of Part indicated in the picture should be faced inside.
Page 8
M4x14 REMARK Please do not fully tighten screws until all screws are in place. ×16...
Page 9
M4x12 Long Short REMARK 1.Fully tighten all the screws after all the screws are in ×8 right place. 2.Please install the screws in numerical order 1-2-3-4. M6x20 REMARK Please do not fully tighten screws until all screws are in place. ×8...
Need help?
Do you have a question about the ACJ012 and is the answer not in the manual?
Questions and answers