Toshiba Satellite R10 Series Resource Manual page 34

34
Setting up your computer and getting started
Locating the sample expansion memory module cover
6 Using a standard Phillips No. 1 screwdriver, unscrew the
screw that secures the expansion memory module slot
cover, then remove the memory slot cover.
Removing the sample memory module cover screw
7 Place the screw and the cover in a safe place so that you
can retrieve them later.
8 Remove the new memory module from its antistatic
packaging.
9 Insert the memory module in the slot and gently press it
down into place.
The clips on either side of the module will click to secure
the module.
Static electricity can damage the memory module. Before you handle
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
To avoid damaging the memory module, be careful not to touch its
gold connector bar (on the side you insert into the computer).
Expansion memory module cover