cecotec CleanFry 3 L Full Inox Instruction Manual

cecotec CleanFry 3 L Full Inox Instruction Manual

Hide thumbs Also See for CleanFry 3 L Full Inox:

Advertisement

Quick Links

CleanFry 3 L Full Inox
Fryer
Instruction manual

Advertisement

Table of Contents
loading

Summary of Contents for cecotec CleanFry 3 L Full Inox

  • Page 1 CleanFry 3 L Full Inox Fryer Instruction manual...
  • Page 3 INDEX Parts and components 1. Safety instructions 2. Before use 3. Functions 4. Cleaning and maintenance 5. Technical specifications 6. Disposal of old electrical appliances 7. Technical support service and warranty...
  • Page 4 Parts and components 1. Lid 2. Handle 3. Control panel 4. Frying basket 5. Hook 6. Heating element with thermostat 7. Inox Tank 8. Main body 9. Handles 10. On/Off light (Red) 11. Temperature light (Green) 12. Temperature dial 13. Safety control button 14.
  • Page 5: Safety Instructions

    • Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec, in order to avoid any type of danger. • Do not twist, bend, strain, or damage the power cord in any way. Protect it from sharp edges and heat sources.
  • Page 6: Before Use

    • Dry all parts of the fryer thoroughly and place the tank, filter, control panel, basket, and lid back in place. Make sure the tank is in its correct position and aligned correctly, the max/min marks should be placed to the right. CLEANFRY 3 L FULL INOX...
  • Page 7: Operation

    G. Turn the temperature dial off and unplug the fryer. Allow it to cool down for at least 2-3 hours before moving or cleaning it. H. Place the foodstuffs in a dish covered with kitchen paper to remove any excess oil. CLEANFRY 3 L FULL INOX...
  • Page 8: Temperature Time

    4. Carefully lower the frying basket into the hot oil. 5. Using tongs, lower the battered foodstuffs slowly into the oil. WARNING: the oil may spit as food is added into it. Once ready, take the foodstuffs out using the frying basket. CLEANFRY 3 L FULL INOX...
  • Page 9: Cleaning And Maintenance

    • Clean the control panel with a damp cloth and/or kitchen paper. IMPORTANT: do not immerse the control panel in water. IMPORTANT: make sure the wires connected to the heating element are not damaged while cleaning. CLEANFRY 3 L FULL INOX...
  • Page 10: Technical Specifications

    6. Put the heating element with the OilCleaner filter in the fryer. 5. TECHNICAL SPECIFICATIONS • Product reference: 03034 • Power: 2000 W • Voltage: 220-240 V 50/60 Hz • Capacity: 3 l • Made in China | Designed in España CLEANFRY 3 L FULL INOX...
  • Page 11: Disposal Of Old Electrical Appliances

    In the event of misuse, the warranty will not apply. If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at +34 96 321 07 28. CLEANFRY 3 L FULL INOX...
  • Page 12 Grupo Cecotec Innovaciones S.L C/ de la Pinadeta s/n , 46930 Quart de Poblet, Valencia, Spain...

This manual is also suitable for:

03034

Table of Contents