Turn On The Rf Output; Setting The Modulation - HP 8647A Operation And Service Manual

Turn on the RF Output 3. Press
@KjiEF]
to turn on the RF output.
RF OFF
is displayed below the amplitude setting when the RF
output is turned off.
MODULATION
-
AMPUTUDE
100.00000
MHz FM 3.00 kHz
rlJnd3.dlw
Setting the
Modulation
4.
Set the F M deviation to 3 kHz.
The modulation rate is displayed below the deviation setting.
Use the MODULATION SOURCE keys when you
wish
to select a
modulation source and turn modulation on or off.
Operation Examples 1 a-3