HP 8647A Operation And Service Manual page 139

AM Distortion Performance Test
Configure the ElP
1. Turn AM on; press
[MOD ONIOFF).
8647A
2. Set the rate; press
C m ) .
3. Set the amplitude; press
I - )
@
L - Z ) .
4. Turn the RF output on; press
( - 1 .
Measure Distortion
1.
Enter the amplitudes, frequencies
and
depths shown in the test
2. Record the test results and compare the results to the limits in the
Amplitudes
record.
test record.
8-8 Performance Tests