Sony XLR-A3M Startup Manual page 10

Help Guide
XLR Adaptor Kit
XLR-K3M
Attaching/removing the XLR adaptor to/from the camera
Attach the XLR adaptor to a camera.
Note
Before attaching/removing the adaptor to/from a camera, turn off the power to the camera.
Remove the connector protect cap from the XLR adaptor.
1
Slide the Multi Interface foot of the XLR adaptor into the shoe on the camera (
2
dial in the "LOCK" direction (
When it is difficult to insert the Multi Interface foot into the shoe, rotate the lock dial counterclockwise until it stops,
and then try again.
To remove the XLR adaptor
Turn off the power to the camera, rotate the lock dial counterclockwise until it stops, and then slide out the Multi Interface
foot from the shoe.
To use the Extension Cable for Audio for attachment
) to firmly secure the adaptor.
8
), and then rotate the lock