DHCP Client, MAC Address Cloning, PPPoE and multiple auto-provisioning methods. 1.2 Package Contents 8-Port VoIP Gateway CD User Manual Cat.5 Cable Power Adapter, 12VDC / 1.6A Model No List VOI-8001 8-Port FXS VoIP Gateway VOI-8002 8-Port FXO VoIP Gateway VOI-8003 4FXS+4FXO VoIP Gateway...
1.3 Key Feature VoIP Support 8 simultaneous VoIP calls Support T.38 FAX relay Support QoS(ToS) for VoIP Compliant with H.323 / SIP VoIP standard protocol Extensible by external IVR/CDR/Billing servers for value- added application Support register up to 4 Gatekeepers / Proxy servers Support worldwide off net call by ITSP service Support Multiple dialing plan / Call hunting group Adaptive Jitter Buffer function...
(Status): This LED will flash quickly when the VoIP Gateway is either performing a self test of booting up. (Power): The LED light on when power on. Note: VOI-8001 displays 1~8 Phone LED only VOI-8002 displays 1~8 Line LED only VOI-8003 displays 1~4 Line and 5~8 Phone LED only...
2.2 Rear Panel VOI-8001 VOI-8002 VOI-8003 DC12V: For the included power adapter. Be sure to use only the 12VDC/1.6A power adapter included with the product. Using the wrong power adapter can damage the product and void the warranty. Reset: Clear all settings and restore them to the initial values present when the device was purchased.
Chapter 3 Configuration The default setting of DHCP Server inside VoIP Gateway is turn ON, So please set up your PC TCP/IP network as “Get IP Automatically” from DHCP to get internal IP from VoIP Gateway. By default, The VoIP Gateway will become the network gateway and default IP is 192.168.22.1 and will assign your PC IP as 192.168.22.X.
3.1 Connection Click “Connected Type” option below “System Setup\Wan” item: Please select the type of Internet connection you have and set up the VoIP Gateway to use the Dynamic IP Address, Static IP Address, PPPoE, PPTP or L2TP connection. If your ISP has not given you an IP address, select Dynamic IP Address (default).
Page 9
To use PPPoE ADSL connection, please select Yes in use “PPPoE” ADSL service and enter the “username” and “password” in the PPPoE setup section. Most of ADSL ISPs assign dynamic-IP settings to the VoIP Gateway when using PPPoE. Please select Obtain IP Address Automatically(default setting).
3.3 Register Server If this VoIP Gateway wants to use SIP Proxy or GateKeeper service to transfer the VoIP call, you can input the server information here. The VoIP Gateway can register to up to four servers simultaneously. This page reveals the status of the server registration information. Here is the server configuration page, please ask the information form your ITSP.
3.4 VoIP Call Out User key in the phone number through phone set dial pad, then VoIP Gateway translate the phone number by the routing table setting here to destination IP & dial out number then Call out via network protocol Remark: For Notify remark for this rule.
Page 13
IP address, for example: 168.56.9.22 URL, route via URL. For example: www.freeworlddialip.com .This VoIP Gateway can setup to register to DDNS service (/System Setup /Advanced/ Dynamic DNS/) to let user call out to another VoIP Gateway with dynamic IP by URL. , route via server, it will get the destination IP by server setting (/VoIP Setup/Register server/) in advance.
Chapter 4 Web UI Management 4.1 Access to Web UI The VoIP Gateway provide user friendly Web interface to let you configure your VoIP Gateway function The default setting of DHCP Server inside VoIP Gateway is turn ON, So please set up your PC TCP/IP network as “Get IP Automatically”...
4.2 Web UI Management The VoIP Gateway provide user friendly Web interface to let you configure your VoIP Gateway function and VoIP function. There are a help on line content within each setting page. Please press Help hyperlink to view the on line help. There are 3 main functions for web, VoIP, System Setup (VoIP Gateway) &...
System Maintenance function Configurations Backup/Restore VoIP Module Backup/Restore Reboot System Save Modification Gateway Manual overview...
Page 17
4.2.2 VoIP Function 4.4.2.1 VoIP Setup/ Port Status/ This page will display the current and last time VoIP call status & result. The PC time : will show the date & time that your connected PC now. The VoIP Gateway time : will show the date & time on this VoIP Gateway, the date&...
Page 18
Out: There is a phone call made from Network VoIP and pick up by phone set. Connected IP: The remotely party IP of this VoIP call. Caller ID: Caller ID received from telephone line port. Start Time: Date & time of this VoIP call begin on this port. End Time: Date &...
Page 19
4.2.2.2 VoIP/Line Configure/ Line Setting /VoIP Setup/Line Configure/Line Setting/ This page will setup the phone line information each port. Port: display the port number, e.g. 1 or 2. Interface: Telephone interface type: FXO: for connect to telephone line or PBX extension line. FXS: for connect to regulate phone set Name: Line name for this port.
Page 20
when you off hook the phone connected to the line 1, it will directly call to another VoIP gateway location at 168.56.09.22 and dial 601. You can enable the line 1 as hot line, and add a routing rule on the routing table on /VoIP Setup/Routing Setup/VoIP Call Out/ to assign the...