SmartDisk Flash PATH Installation & User Manual page 3

FlashPath for Windows
Quick Start
1. Load Software:
From the FlashPath software diskette:
a. Exit and close all other programs.
b. Insert the FlashPath software diskette into your
floppy drive.
c. Select Start
and type
A:\setup.
Click OK to
load software
d. Follow the instructions on your screen to
load software into the default directory.
Note: If you must use a different directory,
refer to the Installation and User Guide.
e. Reboot (restart) your computer.
From the SmartDisk web site:
a. Go to the Downloads section of the SmartDisk
website
(www.smartdisk.com/DownloadDrivers.html).
b. Select Windows Drivers Download Page and
then select your operating system: Windows
95/98, Windows 2000 or Windows NT.
c. Click on the Windows icon for your operating
system.
1. If you choose to download and save the software ,
you will need to run the software from the selected
folder and follow the on-screen instructions.
and Run
2. If you choose to run the program from our
web site, follow the on-screen instructions.
d. Reboot (restart) your computer.
2. To use your Flashpath
Remove the SmartMedia from your camera and
insert it into your FlashPath. Note the orientation
shown in the diagram below.
3. Insert FlashPath into your Floppy Disk
Drive and Transfer Files.
You can now use your FlashPath just like you
would an ordinary floppy disk. For example: Use
Windows Explorer
and double click on
your A (or B) drive to
access, copy, or delete
data on your
SmartMedia through
the FlashPath in your
floppy drive.
Note: Some
cameras create a
directory on the
SmartMedia. You
can copy the whole
directory or open it
and just copy the
images you want.
2