Using Flashpath For Microsoft Windows Nt 4.0 - SmartDisk Flash PATH Installation & User Manual

3. FlashPath can now be accessed through the floppy
drive. You can copy, cut or paste to or from the
FlashPath, and delete, move, edit files (using word
p rocessors, spreadsheet programs, photo editors, etc.)
Note:
• It is not necessary to use the utility "FlashPath
F o rmat" on new SmartMedia, they are pre f o rm a t t e d
at the factory. The FlashPath Format utility should
only be used if the file system on the SmartMedia
becomes corrupted. The FlashPath Format utility
should not be used to erase old pictures.
To format the SmartMedia using the FlashPath
Format utility:
1. Insert the SmartMedia to be formatted into the
FlashPath.
2. Insert the FlashPath into floppy drive A: or B:
3. Run "FlashPath Format":
4. Select the drive and enter volume label. Click
"OK" to format the SmartMedia.
5. In order to prevent data corruption, please be
sure not to eject the FlashPath while formatting.
To erase old pictures from the SmartMedia:
1. First copy any picture files you want to keep to
your hard drive, a floppy disk, or other media.
2. To delete the old picture files, click on the file(s)
and select File/Delete from the menu bar (or press
the Delete key).
Uninstalling FlashPath
Uninstalling FlashPath under Microsoft
95/98 and Windows
1. To uninstall FlashPath software, click on
Start\Settings\Control Panel. Use delete
(add/delete) to uninstall FlashPath.
2. The following screen will appear.
1. Click Yes and follow the directions on the screen
to uninstall the FlashPath software.\
Note: If you receive the message,
Always choose Yes To All to remove shared files
when deleting FlashPath products.
CAUTION
• Be sure to reboot to unload the FlashPath driver
from memory.
13
® Windows
®
2000
®