Troubleshooting Guide - Honeywell USHA care CL30XC Instruction Manual

TROUBLESHOOTING GUIDE

PROBLEM
No discharge of air
Not Cooling / Unit is
making noise
Odour omission
16
POSSIBLE CAUSE
Cord is not plugged in.
Power is not ON.
Pump is not turned ON.
Low or no water in tank,
when COOL is selected.
Damaged Pump or Calcium
deposits on blower.
New Unit.
Old Unit.
SOLUTION
Make sure power cord is plugged
in and the supply switch in ON.
Try to turn the unit ON by
pressing buttons on control
panel or remote control.
Turn on COOL function from
remote or control panel.
Re ll water tank.
Contact service centre.
When the unit is used for the
rst time, the Honeycomb
cooling media will have an
odour, which will dissipate
within a week of initial use.
There may be an algae issue,
Replace the honeycomb cooling
media. Contact service centre.