Page 1
IMPORTANT Before assembling the cage please ensure all the parts are included. If any parts are missing please contact Yuneec UK immediately. Care should be taken during assembly and disassembly that the rods do not cause injury. Beware of the sharp points on the carbon rods when handling them.
Page 2
CONTENTS Motor Arm Clips x6 Top Cross Joint x1 Leg Clips x2 Leg Inserts x4 Toothpick x 1 Side Rods x 2 Front & Rear Rods x 4 Cotton drawstring bag Outer Ring Rods x 6 For motor arm clips and fixings Top Cross Rods x 3 Clear Rod Storage tube x1 ASSEMBLY...
Page 3
Leg Inserts x 4 M otor Arm Clips x 6 H 5 2 0 & H 5 2 0 E H 5 2 0 E o n l y...
Page 4
Outer Ring Rods Assembly x 6 Side Rods Assembly x 2...
Page 5
Front & Rear Rod Assembly x 4 T op Cross Assembly x 1 T op Cross Rods x 3...