Table of Contents
  • Montage des Geräts
  • Montage de L'unité
  • Caractéristiques Techniques
  • Information Réglementaire
  • Montaggio Dell'unità

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Quick Links

ATS1290N IADS DGP Installation Sheet
EN DA DE
FI
FR
IT
1
(2)
4
BUS 1
ON
ON
ON
ON
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
DGP 1
DGP 2
DGP 3
ON
ON
ON
ON
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
DGP 8
DGP 9
DGP 10 DGP 11
BUS 2
ON
ON
ON
ON
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
DGP 16
DGP 17
DGP 18
ON
ON
ON
ON
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
DGP 23
DGP 24
DGP 25 DGP 26
EN: Installation Sheet
Description
ATS1290N is an interface between the ATS LAN bus and an
IADS bus (Intelligent Addressable Device System bus). It
provides two-wire bidirectional communications with up to 32
individually addressed IADS modules. It is intended to be
sitting on the LAN of any existing configuration of ATS
products to expand the system with addressable modules.
A maximum of 7X (ATS1500A) or 16X (ATS3500A,
© 2021 Carrier
NL
(1)
(3)
(5)
(7)
(5)
(8)
(9)
(10)
ON
ON
ON
ON
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
DGP 4
DGP 5
DGP 6
ON
ON
ON
ON
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
DGP 12
DGP 13
DGP 14 DGP 15
ON
ON
ON
ON
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
DGP 19
DGP 20
DGP 21 DGP 22
ON
ON
ON
ON
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
DGP 27
DGP 28
DGP 29 DGP 30
2
(4)
(1)
3
(6)
A
B
(1)
ATS4500A) ATS1290N DGPs can be connected to each ATS
data bus.
Mounting the unit
DGP 7
Mount the ATS1290N PCB in any existing ATS series
enclosure that supports the BB format.
Connections
CON1
See Figure 1, items 4 and 6.
COMMS > +, −: 12 VDC power supply. It is recommended
that where the distance between an ATS1290N and the
nearest device is more than 100 meters, a separate power
supply be used. Refer to the Remote DGP section. When
using an external power supply, use a fused power output
(1A fast).
COMMS > D+, D−: Positive and negative data connection
of the system D+ databus. Units can be up to 1.5 km from
the ATS control panel, depending on the cable used. See
the ATS control panel installation guide for details.
TAMP > Ti, Tc: The PCB tamper switch is connected in
parallel to the external tamper connection. Tamper switch
requires normally open contacts.
1 / 20
(2)
(3)
S
T
A
B
(2)
P/N 1055375 (ML) • REV F • ISS 16APR21
ATS1290
V
U
A
B
(3)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ATS1290N and is the answer not in the manual?

Questions and answers

Summary of Contents for Aritech ATS1290N

  • Page 1 • COMMS > D+, D−: Positive and negative data connection ATS1290N is an interface between the ATS LAN bus and an of the system D+ databus. Units can be up to 1.5 km from IADS bus (Intelligent Addressable Device System bus). It the ATS control panel, depending on the cable used.
  • Page 2 ATS1290N can support 32 inputs in this configuration. Note: Depending on the type of housing used, you can use the PCB tamper or connect an external tamper. Detectors themselves need to be powered by a separate power supply. CON10 Note: This is an optimized solution for retrofit.
  • Page 3: Specifications

    IADS DGP. To facilitate this, the ATS1290N IADS DGP has a jumper (JP2, Figure 1, item 8). Shorting this jumper with a screwdriver for a few seconds will start the learn mode by which modules will become known.
  • Page 4 ATS-centralenheden. Vælg det ønskede Introduktion DGP-nummer, og indstil adresse-dipswitchen som angivet i figur 4. ATS1290N er et interface mellem ATS bussen og en IADS-bus (Intelligent Addressable Device System bus). IADS-DGP’en muliggør totrådet tovejskommunikation med op til 32 individuelt LED’er adresserede IADS-enheder.
  • Page 5 2 inputs er nødvendigt, og derfor kan det være zone/udgang nødvendig at bruge udviddet adresse mode for at holde sig inden for max adresser som er 32 på en ATS1290N. Adresseindstillingen for IADS-enheden er direkte tilknyttet det/de zone- og udgangsnummer, som enheden får på ATS- centralen.
  • Page 6: Montage Des Geräts

    Palm Beach Gardens, FL 33418, USA Einführung AUTORISERET EU-REPRÆSENTANT: Carrier Fire & Security B.V. Die ATS1290N AME ist eine Schnittstelle zwischen dem ATS Kelvinstraat 7, 6003 DH Weert, Netherlands LAN-Bus und einem IADS-Bus (Intelligent Addressable Device Advarsler og DISSE PRODUKTER ER BEREGNET TIL SALG System).
  • Page 7 Spannung für Detektoren – 2 Drähte. • Erdungsanschluss. Verbinden Sie die Abschirmung des Das ATS1290N unterstützt in dieser Konfiguration bis zu 32 ATS COMMS-Kabels. Am anderen Kabelende muss die Eingänge. Für die Spannungsversorgung der Melder ist ein Abschirmung mit der Erdung des Systems verbunden werden.
  • Page 8 16 x 400 m durch die IADS-AME konfiguriert werden kann. Abgesetzter Stern (Position 3): Um dies zu vereinfachen, besitzt die IADS-AME ATS1290N 1 x 40 m 1 x 80 m eine Steckbrücke (JP2, Abb. 1, Position 8). Wenn Sie diese Steckbrücke für einige Sekunden mit einem Schraubenzieher...
  • Page 9 Katso kuva 1, kohdat 4 ja 6. Bestimmungen der Richtlinie 2014/30/EU und/oder 2014/35/EU entspricht. Für weitere • COMMS > +, −: 12 VDC:n tehonsyöttö. Kun ATS1290N- Informationen siehe firesecurityproducts.com oder keskittimen ja lähimmän teholähteen välinen etäisyys on www.aritech.com. yli sata metriä, on suositeltavaa käyttää virtalähteenä...
  • Page 10 Tavallisten ilmaisimien tehonkulutusta ei ole otettu huomioon. • Data + tehonsyöttö ilmaisimille. ATS1290N tukee 16:ta tai 32:ta ilmaisinta. Jotkut ilmaisimet (EV435AM-AD) voivat käyttää kahta osoitetta). Jos osoiteväylä on pitkä ja siinä on paljon laitteita tarkasta, ettei kaapeleissa synny liikaa jännitehäviötä. Osoitteelisten ilmaisimien minimi P/N 1055375 (ML) •...
  • Page 11 Lisätietoja laitteen https://firesecurityproducts.com/en/content/intrusi käytettävissä olevista asetuksista on laitteen käyttöoppaassa. on-intro Laitteen ohjelmointi ATS1290N -moduulin ja siihen liitettyjen laitteiden konfigurointi tehdään ohjelmointiohjelmalla. Katso myös Advisor Advanced ATSx500A(-IP) asennus- ja ohjelmointiohje. P/N 1055375 (ML) • REV F • ISS 16APR21...
  • Page 12: Montage De L'unité

    DGP sur la centrale ATS. Sélectionnez le numéro DGP requis et configurez le micro-interrupteur Le DGP ATS1290N fait office d’interface entre le bus RS485 Adresse comme indiqué à la figure 4. de la centrale ATS et un bus IADS (Intelligent Addressable Device System bus).
  • Page 13 L’ATS1290N supporte jusqu’à 32 entrées dans cette Bus IADS 0,5 mm 1 mm configuration. Les détecteurs doivent être alimentés par une Distribuée (objet 1) : S 1 x 200 m 1 x 400 m alimentation séparée. Etoile (objet 2) : T...
  • Page 14: Caractéristiques Techniques

    Carrier Fire & Security Americas Corporation Inc. 13995 Pasteur Blvd Introduzione Palm Beach Gardens, FL 33418, USA L’ATS1290N è un’interfaccia tra il bus dati dell’ATS e un bus REPRÉSENTANT DE L’UNION EUROPÉENNE IADS (Intelligent Addressable Device System bus). Il AUTORISÉ : concentratore IADS fornisce comunicazioni bidirezionali a 2 fili Carrier Fire &...
  • Page 15 Vedere figura 1, oggetto 4 e 6. IADS configurazioni • COMMS > +, −: Alimentazione 12 V. Qualora la distanza tra l’ATS1290N e il dispositivo più vicino sia superiore Ci sono due configurazioni principali: a 100 metri, è consigliabile utilizzare un alimentatore •...
  • Page 16 Distribuita (oggetto 1): S 1 x 200 m 1 x 400 m Per semplificare questa operazione, il concentratore IADS ATS1290N dispone di un ponticello (JP2, figura 1, oggetto 8). Stella (oggetto 2): T 16 x 200 m 16 x 400 m...
  • Page 17 FORMAZIONE O ESPERIENZA ADEGUATE Montage van de unit PER ESEGUIRE LA CORRETTA INSTALLAZIONE DI PRODOTTI PER LA Monteer de printplaat van de ATS1290N DI in een behuizing SICUREZZA E PER LA PROTEZIONE van de Advisor Master reeks waarin het BB-formaat past. ANTINCENDIO.
  • Page 18 Indien voor de IADS bus een afgeschermd kabeltype wordt • RX: Deze LED knippert om aan te geven dat er poll data gebruikt, mag deze afscherming niet via de ATS1290N DI wordt ontvangen op de systeem databus van het Advisor aardlip, PID−of PID+ aansluiting geaard worden. Het Master controlepaneel.
  • Page 19 ATS1290N IADS DI. Carrier Fire & Security verklaart hierbij dat dit Om dit te realiseren is de ATS1290N IADS DI uitgerust met apparaat voldoet aan de toepasselijke eisen en een jumper (JP2, figuur 1, item 8). Als u deze jumper enkele...
  • Page 20 Deze link leidt u naar de regionale contactpagina van EMEA. Op deze pagina kunt u uw login aanvragen bij de beveiligde webportal waar alle handleidingen zijn opgeslagen. https://firesecurityproducts.com/en/contact Contact informatie firesecurityproducts.com of www.aritech.com P/N 1055375 (ML) • REV F • ISS 16APR21 20 / 20...

Table of Contents