Table of Contents
Advertisement
Installing Your Power Controller
To install your Keypad module:
1
Choose an appropriate location for the Keypad module as described in Installation Hints.
2
Install batteries or plug the AC adapter into the wall and the module.
3
Register your Keypad with your Wireless System:
a. In the homesight software, click System Se
b. Select "Device Discovery" fr
c.
Select "Start Discovery."
d.
After a few seconds, the System Controller will a
details of the device will appear on the screen.
4
Touch your Keypad Key(s) to the Kepypad port and click on Settings/Key Management in the Motorola
homesight™ software to see that the key has been registered.
5
Mount the module, using either the tabletop base or by following the instructions for wall mounting.
Feature Locator
Data and
status LEDs
Keypad port
ttings.
om the menu.
A WAY
DA T A
Away button
ST AT US
HO M E
Home button
KE Y
3
utomatically find and register your sensor and
DISCOVERY
Back View
Discovery
button
Advertisement
Table of Contents
