Installation; Choice Of Location; Proper Operation - Woods L6008 Installation Manual

INSTALLATION

CHOICE OF LOCATION

Whenever possible, locate the unit so that its coverage area is away from heat sources, moving,
best performance, locate the unit so that motion moves across the coverage area and not directly
towards or away from the motion sensor.
Note: The detection range is based on the sensor's performance in conditions that represent
average temperatures found in North America. The detection range of the sensor will vary with
changing ambient temperatures. The motion sensor will desensitize as ambient temperature rises.
Avoid any overheating sources.

PROPER OPERATION

local electrical codes.
2. DO NOT ATTEMPT TO DISASSEMBLE THE MOTION SENSOR. THERE ARE NO SERVICEABLE
PARTS INSIDE.
eave mounting.
house overhang or wall. If higher, the coverage range will be less.
5. Mount away from heat producing sources such as air conditioners and air vents or other
light sources.
7. Do not mount upward facing the sun.
nuisance triggering.
9. Make sure to use the foam gasket and silicone during installation to ensure a watertight
installation.
10. Always point bulbs downward so water cannot enter directly!
11. The photocell recognizes darkness and ensures that the light bulbs only come on between
dusk and dawn. This feature dictates that the light bulbs do not activate during daylight
hours (accept in test mode).
MUST READ: Before installing disconnect the power to the location where the light will
MAIN
CIRCUIT BREAKER OR FUSE
CAUTION: BEFORE BEGINNING INSTALLATION, FIRST
DISCONNECT POWER TO WIRING LOCATION BY SHUTTING
OFF CIRCUIT BREAKER OR REMOVING FUSE AT FUSE BOX.
SHUTTING OFF A WALL SWITCH THAT CONTROLS THE LIGHT
IS NOT SUFFICIENT TO PREVENT ELECTRIC SHOCK.
3