Advertisement
Step 1:
Remove the 2 off Hexagonal Head Bolts,
as shown in the drawing, one on top side
and other one on the bottom side, from
its mounting point, and keep them aside.
The same Hexagonal Head Bolts will be
required to mount the Radiator Guard,
which will be explained in subsequent
steps.
Step 3:
Secure the threads in the mounting point
Ensure Orientation symmetry of the Radiator
Guard and visually check for no fouling points
below its surface or on the sides and tighten
it fully as per OE Torque specifications ( 22 –
24 N-m)
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 2:
Orient and Align the Radiator Guard, as
shown, and Slip-in the M8 Washer – 2 off,
and 2 – off Hexagonal Head Nut and
through the mounting holes in the flap of
the Radiator Guard, in-line with the
mounting points (shown in red color).
Page 3
Advertisement
