Refrigeration unit
Series Uno Undermount
UN120 | UN120 Multi
3.5 Installation of the unit
To install the unit proceed as follows:
With an 8 mm Allen wrench, open the front panel fixtures (Figure 23).
Slide the front panel leftward to remove it
Unscrew the screws that fix the electrical panel (see arrows, Figure 24).
Overturn the electrical panel forward to access the internal components.
Fix the unit with the M14 screws using the fastening supports (see. 3.5.1).
rev.02
INSTALLATION MANUAL
Figure 23
Figure 24
25