Table of Contents
Advertisement
ADDING RINSE AID
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot
rinse phase.
•
Fill the dispenser until the rinse aid reaches the marking "MAX".
•
Remove any spilled rinse aid with an absorbent cloth to prevent excessive foaming during the washing
cycle.
•
Fill the rinse aid dispenser when the indicator (A) becomes clear.
DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in programme
selection mode.
•
If the salt indicator is on, fill the salt
container.
ADDING DETERGENT
If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance
door.
ADDING MULTI-TABLETS
•
Do not fill the salt container and the rinse aid dispenser.
10
1
2
1
2
A
•
If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start a programme suitable for the type
of load and the degree of soil.
Advertisement
Table of Contents
