Motorola L3000 User Manual page 4

1. Antenna
2. Earpiece - When the Flip is open, the earpiece is used for listening
during low-audio communication.
3. Volume Control Keys - Used to adjust volume levels of the ear-
piece, speaker, ringer, keypad, and message notification.
4. Status Indicators - Solid or blinking lights indicate different con-
ditions that your unit may be in. (See the "Safety and General Infor-
mation" section of the L3000 User's Guide for the Status Indicator
Table).
5. Alphanumeric Display - A three-line display, providing up to 11
characters per line.
6. Option Keys - Used to select the option that appears directly above
the key on the third line of the display.
7. Directional Keys - Used to perform Memory, Scrolling, optiona
scrolling, and editing.
8. Private Mode Key - Used for one-to-one private radio communi-
cation.
9. Group Mode Key - Used for one-to-many radio communication.
10. Alphanumeric Keypad - Used for direct entry of radio IDs, ser-
vice area IDs, talkgroup IDs, phone numbers or names.
11. Flip - Used to answer and end phone calls. Also used during Radio
Operation to swith between high audio levels (Flip closed) and Ear-
piece audio levels (Flip open).
12. Phone Control Keys - Used to place (
( ) telephone calls.
END
13. Microphone - Used to speak into during communication.
14. Phone Mode Key - Used for telephone communication.
15. Active Line Key - Used to control the Active Line Indicator ( )
that appears on the display.
16. Push-toTalk (PTT) Button - Used to transmit voice during Group
Calls and Private Conversations. Also used to send Call Alerts.
17. Mute Key - Used to enable and disable the microphone during tele-
phone calls so that the other party cannot hear you. A solid yellow
status indicator illuminates when the microphone is muted.
18. Power On/Off Key - Used to turn the portable unit on and off.
19. Emergency Key - Used to make emergency group calls.
20. Speaker - When the flip is closed, the speaker is used for listening
during high-audio radio communication.
) or terminate
SEND
3