Clock; Alarm Management; Figure 4.17 Clock Configuration Page; Table 4.8 Alarm Management Menu Options - RLE Technologies SeaHawk LD2000 User Manual

4.3.11 Clock

The Clock Configuration page allows users to set the date and time on the LD2000's internal
clock.
Enter the date using a MM/DD/YY format, where MM is a two digit month, DD is a two
digit day, and YY is a two digit year.
Enter the time using a HH/MM/SS format, where HH is a two digit hour (1-24), MM is a two
digit minute (1-60), and SS is a two digit second (1-60).

Figure 4.17 Clock Configuration Page

4.3.12 Alarm Management

The Alarm Management page allows users to acknowledge, reset, and clear alarms.

Table 4.8 Alarm Management Menu Options

Alarm Management
Menu Options
Acknowledge SNMP
Informs
Reset Leak Alarm
Clear Alarm History
www.rletech.com
Description
Acknowledges SNMP Informs and ceases Informs from being sent
out for the current alarm condition.
Resets the current leak alarm and causes the unit to recheck the
current cable conditions. This will clear the alarm condition if the
cable registers that the leak threshold is within an accepted range.
Clears the alarm history table of all previous alarms.
43
4 Web Interface
970.484.6510