Figure 4.6 Latching Alarms/Leak Configuration - RLE Technologies SeaHawk LD2000 User Manual

4 Web Interface
Table 4.1 Link Settings Menu Settings (continued)
Leak Settings Menu
Option
Measurement
Display
Latching Alarms

Figure 4.6 Latching Alarms/Leak Configuration

www.rletech.com
Description
The type of units that are displayed on the LD2000. Select either feet
or meters to calibrate the unit to the preferred unit of measure.
This option selects the latching ability for the alarm notifications of
the unit. Latching alarms will hold the unit in an alarm state, even
after the condition has been cleared, until someone presses the
Reset button, located on the front of the physical LD2000 unit.
30 970.484.6510