Table of Contents
Advertisement
M
O
ENU
VERVIEW
How to Navigate Menus
Press the "M" push button to enter selection across the menu structure. Use the "Up" and
"Down" push buttons to select individual parameters or to adjust settings. CO2 gas is used
as an example to outline the SL detector menu structure, calibration menu, alarm setpoints
etc. Note: these settings may not be suitable for every application. Consult with Helio Gas
Detection representative prior to installation. Upon order, the gas type and signal
configuration should be specified, so that the SL detector can be shipped preconfigured.
Menu overview continued next page...
HGD GS VER. 1.02
8
Advertisement
Table of Contents
