Specifications - Watkiss SpineMaster Operating Manual

Intended Use
Production
Booklet Size
Pass Through Mode
Manual Unload Mode
Booklet Thickness
Dimensions
Weight
Electrical
Operating Conditions
Watkiss SpineMaster Operator Guide - Issue 1 - June 2000

6 Specifications

This product is intended for the re-forming of booklet
spines, to flatten the booklet and give a square appear-
ance to the spine, within the specifications below.
up to 1320 per hour single pass
up to 1000 per hour double pass
Width up to 350mm, 13.7"
Height 105 to 216mm; 4.2 to 8.5"
Width up to 350mm, 13.7"
Height minimum of 140mm, 5.5"
minimum of 1mm, 0.04"
maximum of 6.5mm, 0.25". This is approximately 30
sheets of 80gsm (20# bond) folded into a 120 page
booklet.
Width 710mm, 28"
Depth 700mm, 27.6"
Height 1060mm, 41.7"; working height 910mm, 35.8"
98kg, 216lb
230V, 50Hz, 3A or 115V, 60Hz, 5A
Single Phase, Earthed supply required
Noise 72 dB(A)
10-35°C at 35-85% relative humidity
Production and specifications are subject to operating
conditions. The specified paper thickness figures are
given for guidance only. The actual performance of the
machine will depend on the nature of the paper and
covers used. In line with a policy of continual
improvement, the manufacturer reserves the right to
13