Keysight Technologies N778-C Series User Manual page 72

4 User Interface Reference
WARNING
WARNING
72
Your connection to the instrument may be broken after executing either
of the operations below. If so, reconnect to the instrument using the new
hostname or IP address.
3 Once, the changes are done, click on Apply Changes button.
It can take up to 30 seconds for these changes to take effect. You may
NOTE
need to refresh the Configure LAN page after 30 seconds to see the
updated settings. Changes in hostname and description require reboot or
LAN restart to take effect.
Reset Network Configuration
The Configure LAN tab also allows you to reset all LAN parameters to the
factory default. To do so, click the Advance Options button available on
Configure LAN tab. The Advance Network Options page will appear. Click
on the Reset button to reset all LAN parameters to the factory default.
Your browser connection to the instrument may be broken after
executing the reset network configuration operation. If so, reconnect
to the instrument using the new hostname or IP address.
Keysight N778-C Series Polarization Instruments User's Guide