Page 1
MINI electric scooter. E-mail Service: vip@isinwheel.com The manufacturer reserves the right to make changes to the product, and update this manual at any time Visit www.isinwheel.com to download the latest user materials www.isinwheel.com...
Assembly 1. Electric skateboard assemble: Put the mounting nut into the front axle slot, and insert the axle screw into the wheel and mounting nut, then use the Allen wrench to tighten the axle screws of both sides. 2. Electric scooter assemble: Open the front rubber cover and insert the handlebar into the skateboard to the end, when you hear a click, it means it is in the right place.
Specifications Name iSinwheel MINI Electric Scooter Model MAX Speed MINI 8 mph / 13 km/h 62×32×79 cm Size Battery 12 V 5 Ah 24×12×31 in Charger Weight 3.7 kg / 8 lb AC 100-240 V Specification 50-60 Hz MAX Load...
Learning to Ride 1. Wear an approved helmet and other protective gear to minimize any possible injury. 2. Power on the scooter and check the power level. Charge the scooter if the battery level is low. 3. Stand on the foot deck with one foot and push off with your foot to start gliding.
3. Before each ride check for loose fasteners and damaged components. 4. Be alert! Scan both far ahead and in front of your MINI Scooter -your eyes are your best tool for safely avoiding obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice) 5.
Battery Maintenance 1. When charging, please use the charger configured with this product, do not use the charger not configured with this product, otherwise, will cause danger. 2. Please use a compliant power socket, AC100-240V50-60Hz, and the power of the socket is matched with the charger, otherwise, it will cause danger. 3.
Notice 1. Solid grease should be added regularly to various parts such as the wheel, handlebar, and so on to improve the service life of the scooter. 2. DO NOT carry heavy objects on the handlebar. 3. DO NOT ride double or carry any passengers. 4.