Malfunctions - Bosch WAJ2406GPL User Manual And Installation Instructions

Table of Contents

Advertisement

Fault
⁠ lights up.
⁠ flashes.
All other error codes.

Malfunctions

Fault
The appliance is not work-
ing.
The programme does not
start.
Cause
The tap is turned off.
The water inlet hose is
kinked or jammed.
The temperature is too high.
Water level is too high.
Laundry is caught in the
door.
Door is not closed.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed 
Dodaj pranie.
Door is not closed.
Childproof lock is activated.
troubleshooting
Turn on the tap.
Ensure that the water inlet hose is
not kinked or jammed.
Wait until the temperature has
dropped.
→ "Cancelling the programme",
Page 33
Start the Odpompowanie  pro-
gramme.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press
 / Dodaj pranie to start
4.
the programme.
Close the door.
1.
Press
 / Dodaj pranie to start
2.
the programme.
Call the after-sales service.
→ "Customer Service", Page 51
troubleshooting
Connect the appliance to the power
supply.
Check the circuit breaker in the
fuse box.
Check whether the lighting in your
kitchen or other appliances are
working.
 /
Press
 / Dodaj pranie.
Close the door.
1.
Press
 / Dodaj pranie to start
2.
the programme.
→ "Deactivating the childproof
lock", Page 34
Troubleshooting en
43

Advertisement

Table of Contents
loading

Table of Contents