Bosch WAJ2406GPL User Manual And Installation Instructions page 44

Table of Contents

Advertisement

en Troubleshooting
Fault
The programme does not
start.
The door cannot be opened.
The water is not draining.
44
Cause
Gotowe za is activated.
Laundry is caught in the
door.
– –– is activated.
The temperature is too high.
Water level is too high.
Power failure.
Drain pipe or water outlet
hose is blocked.
Drain pipe or water drain
hose is caught or jammed.
Drain pump is blocked.
– –– is activated.
troubleshooting
Check whether Gotowe za is activ-
ated.
→ "Buttons", Page 22
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press
 / Dodaj pranie to start
4.
the programme.
Continue the programme by select-
ing Wirowanie or Odpompow-
anie and pressing
pranie.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 33
Wait until the temperature has
dropped.
→ "Cancelling the programme",
Page 33
Start the Odpompowanie  pro-
gramme.
Open the door using the emergency
release.
→ "Emergency release", Page 49
Clean the drain pipe and the water
outlet hose.
Ensure that the drain pipe and wa-
ter drain hose are not kinked or
trapped.
→ "Cleaning the drain pump",
Page 37
Continue the programme by select-
ing Wirowanie or Odpompow-
anie and pressing
pranie.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 33
 / Dodaj
 / Dodaj

Advertisement

Table of Contents
loading

Table of Contents