Skyworks Si55 Series Reference Manual

Recommended xtal, xo, vcxo, tcxo, and ocxo

Advertisement

Si55xx, Si540x, and Si536x Recommended
XTAL, XO, VCXO, TCXO, and OCXO
Reference Manual
The purpose of this document is to provide a list of Crystals
(XTALs), Crystal Oscillators (XOs), Voltage Controlled Crystal Os-
cillators (VCXOs), Temperature Compensated Crystal Oscillators
(TCXOs), and Oven Controlled Crystal Oscillators (OCXOs), that
are recommended for use with Skyworks high-performance net-
work synchronizers, jitter attenuators and clock generators that
utilize fifth-generation DSPLL™ and MultiSynth™ technologies.
In this document, the Si5508/10/12/18 RF jitter attenuators and network synchronizers
will be referred to as the Si55xx product family, the Si5401/02/03 network synchronizers
will be referred to as the Si540x product family, and the Si5360/61/62/63 clock gener-
ators and jitter attenuators will be referred to as the Si536x product family. The recom-
mended references and reference frequencies for each product family are selected to
give best performance in their intended applications.
Customers should qualify any reference device using their own internal standards and
monitor specification compliance and quality of these devices over time. In circuit evalu-
ation, it is recommended to verify that the reference meets all application requirements.
See relevant device data sheets and reference manuals for external reference termina-
tion and layout recommendations. This document is purely intended to guide the selec-
tion of the reference oscillators that are paired with the Si55xx/Si540x/Si536x chipsets.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
1
206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022
RELATED DOCUMENTS
• Si55xx Reference Manual
• Si540x Reference Manual
• Si536x Reference Manuals
• AN1293: Si55xx Schematic Design and
Layout Guidelines
• AN1347: Si540x Schematic Design and
Layout Guidelines
• AN1357: Si536x Schematic Design and
Layout Guidelines
RELATED SKYWORKS PARTS
• Si5512/18 RF Jitter Attenuator +
TM
NetSync
wireline network synchronizer
clocks
• Si5510/08 RF Jitter Attenuators
• Si5401/02/03 NetSync
TM
Wireline Network
Synchronizer Clocks
• Si5361/62/63 Jitter Attenuators
• Si5360 Clock Generator
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Si55 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Skyworks Si55 Series

  • Page 1 Si55xx/Si540x/Si536x chipsets. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 2: Table Of Contents

    5. Revision History ......Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 3: Phase Noise References (Xtals, Xos, Vcxos)

    Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 4: Recommended Crystals (Xtals)

    Application Note for more detailed XTAL connections and layout recommendations. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 5 Si55xx, Si540x, and Si536x Recommended XTAL, XO, VCXO, TCXO, and OCXO Reference Manual • Phase Noise References (XTALs, XOs, VCXOs) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 6: Recommended Crystal Oscillators (Xos)

    Also, see the design/layout guideline application notes for how to power XOs. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 7 Note: Some of the part numbers in this table are custom generated for Skyworks. Part Family information is included in the table to enable searching through vendor websites. Users can also contact the vendor directly and ask for the specific part number listed.
  • Page 8: Recommended Voltage-Controlled Oscillators (Vcxos)

    Figure 1.3. Si5508/10/18 Clock with VCXO Phase Noise Reference on REF_IN Input Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 9 2. V4104 is not recommended for new designs. For new designs, use V4185. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 10: Stability And Holdover References (Tcxos/Ocxos)

    Figure 2.2. Si5512/18 RF JA + Network Synchronizer with OCXO/TCXO and XO Reference Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 11: Tcxos

    Stratum 3 level of performance. Note: Some of the part numbers in this table are custom-generated for Skyworks. Part family information is included in the table to enable searching through vendor web sites. Users can also contact vendors directly and ask for specific listed part numbers.
  • Page 12: Ocxos

    Stratum 3E level OCXO or better should be used for all applications requiring time holdover. Note: Some of the part numbers in this table are custom generated for Skyworks. Part Family information is included in the table to enable searching through vendor web sites. Users can also contact the vendor directly and ask for specific listed part numbers.
  • Page 13 Avoid this OCXO frequency for applications which have a 10 MHz input from a GNSS receiver. 2. The holdover times listed are approximates provided by the supplier. Skyworks does not test holdover. Contact the supplier for more detailed holdover questions and test reports.
  • Page 14: Appendix A - Selecting An Xtal For Your Application

    A quartz XTAL can be modelled electrically as a series RLC in parallel with a capacitance indicating the connections as shown in the figure below. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 15 ωL Q   =   Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 16 4. The XTAL must be specified to operate with a maximum drive level of 200 μW. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 17: Appendix B - Selecting An Xtal Oscillator For Your Application

    This is defined at room temperature of 25°C. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 18 12 kHz to 20 MHz is a very common band of integration. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 19 — ±50 ppm are availa- Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 20 2. VCXO to Fout transfer function of a Low Pass Filter of ~1 MHz will attenuate XO spurs that are above ~1 MHz Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 21: Revision History

    • Initial release with alphanumeric revision code. • Modified content throughout. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 206422A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 9, 2022...
  • Page 22 Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer.

This manual is also suitable for:

Si540 seriesSi536 series

Table of Contents

Save PDF