Laird Technologies chiller. Incoming Inspection Laird Technologies’ chiller units are designed, built, and packaged to withstand the shock and vibration normally associated with shipment by common carriers. Occasionally, improper handling during shipment, such as excessive vibration, crushing, etc., will cause damage to the product.
(10.4 to 104) Controller accuracy, °C ± 0.16 Frequency, Hz 50/60 For ambient conditions outside this range, please contact Laird Technologies. For temperature settings below 2°C, an appropriate coolant must be used. USA: +1 888.246.9050 Europe: +44.1342.315044 Asia: +886.3.312.9292 www.lairdtech.com • clv.customerpos@lairdtech.com...
Page 8 Installation and Operation Instructions 1. Install Laird Technologies chiller on a level surface capable of supporting the weight of the Unit. Allow 30 cm (12”) clearance around the air inlet and discharge areas to insure proper air circulation. If obstacles block the airflow, the unit may overheat.
Doc#: 60-70-004 Revision: 07 User’s Manual Page 9 Recommended Fluid Couplings For the fluid line connections, Laird Technologies recommends the following male couplings. CPC (Colder Products Co.) Unit Tubing Inner Diameter Part Number 1/4” PLCD26004 MRC 150, 5/16” PLCD26005 MRC 300 3/8”...
Page 10
Doc#: 60-70-004 Revision: 07 User’s Manual Page 10 Factory Available range Function Code Unit Recommended range setting of values °C or Set Point 10° -200°C to 400°C -15°C to 40°C °F Set Scale Max °C or (High Set Point H i . S c 40°C 400°C 40°C...
Doc#: 60-70-004 Revision: 07 User’s Manual Page 11 Troubleshooting Guide Problem Possible Reason Corrective Action Unit will not start, with power switch turned ON. Controller Check Power supply and ensure Power not applied. display is off and fans are not proper voltage in the line.
This warranty covers repair or replacement of product, to be done at a Laird Technologies facility, for a period of one (1) year from date of shipment. Customer is responsible for shipping product to Laird Technologies freight prepaid. Laird Technologies in turn will return the warranted product to customer freight prepaid, if within the time period specified above.
Laird Technologies will in no way be liable for incidental or consequential damage whatsoever or for any other claims by the customer for damages in connection with Laird Technologies products, even if advised in advance of the possibility of such damage.