Table of Contents
Advertisement
4.2 Starting measurement
Power on state, after you wear the cuff correctly, the "cuff detection
icon" lights up, then you can start the measurement:
(1) Press the "Power
" button, and the device will return to zero
automatically, the air pump will start to inflate the cuff, and the screen
will display the change of the pressure in the cuff.
(2) When reaching the stable pressure upon inflation, the air pump will
stop the inflation, and the pressure in the cuff will be reduced gradually
and displayed on the screen. If the inflated pressure is insufficient, the
device will reinflate the cuff automatically for a higher pressure.
(3) When the pulse is measured, the screen will display the "heart"
- 12
Advertisement
Table of Contents
