value of the sector will start from the minimum individually.
3.3 Talking function setting (voice version only)
After entering talking function setting mode, "
" will show up at the
SYS area, with the current voice status "
" / "
" and voice icon
(not displayed, when talking function mode is off) at the DIA area. Press
the "Memory
" button to switch the voice status and press the
"User
" button for confirmation.
3.4 Unit setting
Either 0 or 0.0 will show up on the screen, upon entering the "Time"
setting mode, by pressing the "User
" button. Display of 0 indicates
that the mmHg unit is selected; display of 0.0 indicates that the kPa unit
is selected. Unit will be switched upon every press on the "Memory
"
button. After the unit is selected, press the "User
" button again to
save the unit setting.
- 10