Motorola T2288 User Manual page 61

        
Select Phone Line
Press . Select the Quick Access feature (
1/2?).
This option allows you to switch between Line 1 and Line 2.
Availability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
This feature is not available when you are using the
GSM 900 band.
Adjust Ring Volume
This option is used to set the incoming call ring tone volume.
The volume will be displayed as follows:
Adjust the volume by pressing the volume buttons on the side of
your phone.
Press followed by the volume button to either
increase or decrease the ringer volume.
Ringer On or Off
Sets incoming call alert to either a ringer tone or a display
message.
Set Ringer Tone
This option sets the tone your phone will make when an
Switch Line
incoming call is received on Line 1.
Standard Tone
Your phone makes a standard ringing tone.
Single Ring Tone ... Music Tone
When selected, your phone will produce one of these alternative
ringer tones.
If you select the Single Ring Tone option, the phone will only
ring once when a call is received.
Set Ringer Tone 2
This option sets the tone your phone will make when an
incoming call is received on Line 2.
This option will not appear if you do not subscribe to Line 2.
Phone Lock
Press . Select the Quick Access feature (
Now?).
This option is used to set, and change, the unlock code.
The unlock code can be set to protect your phone from
unauthorised use. It can be set to automatically lock your phone
each time it is switched on.
The unlock code is a four digit number which is set at
manufacture to 1234. This can be changed at any time by using
the 'change unlock code' option.
Using the Options Menu
Lock
59 English