Advertisement
GATE INSTALLATION
STEP 8
Use HEX WRENCH (Q) to tighten hex nuts until flat side
is secure against frame
NOTE: This step is important for gate stability. If gate
become loose over time, check hex nuts and re-tighten
as needed.
STEP 9
Attach HINGE COVER LOCKS (P) on top and bottom
hinges by pressing into place until hearing a click
Note orientation of hinge cover lock in diagram above
Remove hinge cover locks by inserting flathead screw-
driver under side of lock and lifting off
Q
P
1
2
Unlocking Gate
Unlock gate by pressing
down on button and lifting
gate frame while button is
depressed.
Advertisement
