Download Print this page

Assembly & Installation Instructions - Primetime Petz Safety Mate Assembly Instructions & User Manual

Expandable pet gate

Advertisement

Safety Mate
Expandable Pet Gate
ASSEMBLY & INSTALLATION INSTRUCTIONS
Important: Keep instructions for future reference. Read instructions thoroughly before assembling and installing gate.
WARNING
Not for use as a child's gate.
Fits openings from 24.5" to 41".
The surfaces that the safety gate is to be fixed to must be suitable for the purpose and must be structurally sound.
NOTE: Do not use this gate if it can't be installed to walls, door frames or posts tightly and flatly.
This safety gate shall not be fitted across window openings and the like.
Securely install and operate the gate according to instructions to help prevent accidental injury.
Do not use the safety gate if any components are damaged or missing.
Install this gate away from heaters and other sources of heat.
This gate is intended for indoor use and is not to be exposed to outdoor elements.
Adult assembly required. Hardware contains small screws with sharp points and small parts that can present a choking
hazard. Keep unassembled parts out of reach of small children and pets.
Do only use original spare parts for this product. Periodically check the security of the fixings and general condition of the
parts. Adjust as necessary, referring to these instructions.
Do not allow older children to climb over this gate as this may pose a danger.
Please make sure the barrier is properly closed after each use.
RECOMMENDATION
Mist the gate with a bitters-type serum regularly to discourage chewing.
CARE OF YOUR PRODUCT
No part of the gate requires lubrication.
Clean the gate using warm water and a mild detergent.
Never use solvents, chemicals, scouring powders or sharp tools in connection with cleaning the gate.

Advertisement

loading